These large eyelets insert directly into the tape wire in your dollhouse and can be used as a flush outlet.
Most imported lamps come equipped with a larger but not to scale Hong Kong type plug. For those not wishing to discard this plug, the CKC1023-2 eyelets provide a simple alternative. First, using the plug attached to the lamp as a guide, mark two holes on the tape run. Then, using either the CKC1044 Awl or a No. 52 drill bit, make two starter holes and insert eyelets. The lamp plug may now be directly inserted, making for an attractively flush and easy to install outlet. Eyelets are brass and measure approximately 3/16" long with an inside diameter of .054" and outside diameter of .071". Packaged in quantities of 20. Illustrated instructions in package.