Electrical Wiring Accessories


60pc dollhouse brass brads. Our 1/8" brads are some of the smallest in the world. When folded corners in a tape run are not desired these small, precisely made brads provide a very unobtrusive and effective means of establishing electrical connection. Their small size permits usage on even the thinnest of wood walls and nearly disappear from view when pounded into a conductive tape run. Measure approximately 1/8" by .024". The 1/4" brads are made of solid brass and may be used for dozens of electrical and woodworking projects! These also measure approximately .024" in diameter. Included in each CKC1003 outlet and CKC1011 switch package.

1/8 inch brass brads 300pcs

US$8.25 US$7.96

300 pc miniature brass brads.  Our 1/8" brads are some of the smallest in the world. When folded corners in a tape run are not desired these small, precisely made brads provide a very unobtrusive and effective means of establishing electrical connection. Their small size permits usage on even the thinnest of wood walls and nearly disappear from view when pounded into a conductive tape run. Measure approximately 1/8" by .024". The 1/4" brads are made of solid brass and may be used for dozens of electrical and woodworking projects! These also measure approximately .024" in diameter. Included in each CKC1003 outlet and CKC1011 switch package.

1/8 inch Brass Brads 60pcs

US$2.60 US$2.96

Dollhouse miniature brass brads, 60pcs.  Our 1/8" brads are some of the smallest in the world. When folded corners in a tape run are not desired these small, precisely made brads provide a very unobtrusive and effective means of establishing electrical connection. Their small size permits usage on even the thinnest of wood walls and nearly disappear from view when pounded into a conductive tape run. Measure approximately 1/8" by .024". The 1/4" brads are made of solid brass and may be used for dozens of electrical and woodworking projects! These also measure approximately .024" in diameter. Included in each CK1003 outlet and CK1011 switch package.

The CK806 Ceiling Plate allows any light to be mounted on the same surface as the tape run and become a truly "plug-in" fixture. (CKC806-1). For use with miniature dollhouse lighting. One inch scale.

Use the larger heat shrink tubes for interconnecting heavier gauge wires. Each tube is black in color, measures 1" in length and shrinks to 1/2 the original size when heated. CK1033-4 (1/16" inside diameter) 24 gauge, i.e., CK203-1 speaker-type wire.

Use the larger heat shrink tubes for interconnecting heavier gauge wires. Each tube is black in color, measures 1" in length and shrinks to 1/2 the original size when heated. CK1033-6 (3/16" inside diameter) 18 gauge lamp cord wire.

Black Heat Shrink Tubes 6pcs. 3/16i.d. - CKC1033-6

Use the larger heat shrink tubes for interconnecting heavier gauge wires. Each tube is black in color, measures 1" in length and shrinks to 1/2 the original size when heated. CK1033-5 (3/32" inside diameter) 20 gauge, i.e., CK1008 series lead-in wire.

The remarkable Cir-Kit Concepts' CK800 ceiling canopy makes any dollhouse chandelier removable with just a "twist of the wrist". A quarter turn clockwise for installation and a quarter turn back for removal. Nothing could be simpler! And the rich plating will compliment even the most ornate of hanging fixtures. You're sure to agree it's the easiest method yet for installing ceiling chandeliers. Complete instructions included. (CKC800)

C.  (CKC804-2)

Cir-Kit Concepts is proud to announce its latest marvel, a push-in, pull-out chandelier adapter. For the first time ever, chandeliers can now be made removable using the ceiling plate that is part of most chandelier designs. The secret of these adapters lies in the use of specially designed spring-loaded eyelets. These eyelets firmly grasp the adapter and securely hold the chandelier to the ceiling. Tests have shown them capable of holding fixtures in excess of four ounces. Most chandeliers weigh in at less than an ounce. Four different diameters allow usage with almost any existing size chandelier, each sold separately. The brass-plated finish and flush fit results in a matching and beautifully coordinated ceiling plate assembly. When attached they will, in most instances, appear as an integral part of the chandelier ceiling plate itself. Just remember you needn't perform major surgery to make your chandelier a plug-in. All that's necessary is a Cir-Kit Concepts' chandelier adapter. Extra spring-loaded eyelets are available in CK1023-6 (2 pak) packages.

A. Dollhouse miniature Chandelier Adapter 15/32

Cir-Kit Concepts is proud to announce its latest marvel, a push-in, pull-out chandelier adapter. For the first time ever, chandeliers can now be made removable using the ceiling plate that is part of most chandelier designs. The secret of these adapters lies in the use of specially designed spring-loaded eyelets. These eyelets firmly grasp the adapter and securely hold the chandelier to the ceiling. Tests have shown them capable of holding fixtures in excess of four ounces. Most chandeliers weigh in at less than an ounce. Four different diameters allow usage with almost any existing size chandelier, each sold separately. The brass-plated finish and flush fit results in a matching and beautifully coordinated ceiling plate assembly. When attached they will, in most instances, appear as an integral part of the chandelier ceiling plate itself. Just remember you needn't perform major surgery to make your chandelier a plug-in. All that's necessary is a Cir-Kit Concepts' chandelier adapter. Extra spring-loaded eyelets are available in CK1023-6 (2 pak) packages.

60pc dollhouse brass brads. Our 1/8" brads are some of the smallest in the world. When folded corners in a tape run are not desired these small, precisely made brads provide a very unobtrusive and effective means of establishing electrical connection. Their small size permits usage on even the thinnest of wood walls and nearly disappear from view when pounded into a conductive tape run. Measure approximately 1/8" by .024". The 1/4" brads are made of solid brass and may be used for dozens of electrical and woodworking projects! These also measure approximately .024" in diameter. Included in each CKC1003 outlet and CKC1011 switch package.

Categories

Top Seller

0 Item(s)
US$0.00