Electrical Wiring Accessories


B. (CKC804-1)

Cir-Kit Concepts is proud to announce its latest marvel, a push-in, pull-out chandelier adapter. For the first time ever, chandeliers can now be made removable using the ceiling plate that is part of most chandelier designs. The secret of these adapters lies in the use of specially designed spring-loaded eyelets. These eyelets firmly grasp the adapter and securely hold the chandelier to the ceiling. Tests have shown them capable of holding fixtures in excess of four ounces. Most chandeliers weigh in at less than an ounce. Four different diameters allow usage with almost any existing size chandelier, each sold separately. The brass-plated finish and flush fit results in a matching and beautifully coordinated ceiling plate assembly. When attached they will, in most instances, appear as an integral part of the chandelier ceiling plate itself. Just remember you needn't perform major surgery to make your chandelier a plug-in. All that's necessary is a Cir-Kit Concepts' chandelier adapter. Extra spring-loaded eyelets are available in CK1023-6 (2 pak) packages.

D.  Dollhouse miniature Chandelier Adapter 27/32  (CKC804-3)

Cir-Kit Concepts is proud to announce its latest marvel, a push-in, pull-out chandelier adapter. For the first time ever, chandeliers can now be made removable using the ceiling plate that is part of most chandelier designs. The secret of these adapters lies in the use of specially designed spring-loaded eyelets. These eyelets firmly grasp the adapter and securely hold the chandelier to the ceiling. Tests have shown them capable of holding fixtures in excess of four ounces. Most chandeliers weigh in at less than an ounce. Four different diameters allow usage with almost any existing size chandelier, each sold separately. The brass-plated finish and flush fit results in a matching and beautifully coordinated ceiling plate assembly. When attached they will, in most instances, appear as an integral part of the chandelier ceiling plate itself. Just remember you needn't perform major surgery to make your chandelier a plug-in. All that's necessary is a Cir-Kit Concepts' chandelier adapter. Extra spring-loaded eyelets are available in CK1023-6 (2 pak) packages.

Extra hollow eyelets are available in CK1023-6 (2 pak) packages. For use with Cir-Kit adapters. These eyelets firmly grasp the adapter and securely hold the chandelier to the ceiling. Tests have shown them capable of holding fixtures in excess of four ounces. Most chandeliers weigh in at less than an ounce.

Clear Heat Shrink Tubes 12 pieces. These small shrink tubes provide an excellent means of connecting 32-gauge wires such as GOW bulb wires together without the use of solder. The shrink tube is simply slide over one of the wires to be joined, the bared wires twisted together, and the shrink tube slid back over the connection. Once in place a very small amount of heat from a hair dryer, match or candle may be used to shrink the tube and create a tight, insulated connection for the wires. The CK1033 and CK1033-3 heat shrink tubes are some of the smallest made, both in diameter and wall thickness. The inside diameter is .040" or just slightly larger then the insulation on a GOW bulb wire. The wall thickness is approximately .002" (the thickness of transparent tape). The end result is an extremely small diameter splice once the tube has been heated, giving a very unobtrusive electrical connection. Each tube measures approximately 1/2" long.

Green Heat Shrink Tubes 12 pieces - Miniature Dollhouse. These small shrink tubes provide an excellent means of connecting 32-gauge wires such as GOW bulb wires together without the use of solder. The shrink tube is simply slide over one of the wires to be joined, the bared wires twisted together, and the shrink tube slid back over the connection. Once in place a very small amount of heat from a hair dryer, match or candle may be used to shrink the tube and create a tight, insulated connection for the wires. The CK1033 and CK1033-3 heat shrink tubes are some of the smallest made, both in diameter and wall thickness. The inside diameter is .040" or just slightly larger then the insulation on a GOW bulb wire. The wall thickness is approximately .002" (the thickness of transparent tape). The end result is an extremely small diameter splice once the tube has been heated, giving a very unobtrusive electrical connection. Each tube measures approximately 1/2" long.

These pins are an integral part of the CK104 wiring kit and are used during the wiring process as electrical standoffs and connection points between wiring runs. They are also used with the CK1028 and CK1028-1 Adapter Cords.

Pins are made of solid brass and measure approximately 1/2" in length by .032" in diameter. Solder when used with tapewire for best electrical contact.

The CKC1007 Junction Splice serves as the juncture point for connecting the lead-in wire to a tape run. The imbedded nails, in addition to holding the connector in place, also establish electrical contact between the tapewire and the male pins on the lead-in wire plug. It is simply placed over the tape run and pounded in. Two sets of protruding teeth on the bottom also provide additional paths for current flow into the copper foils. The threaded screw aids in locking the junction splice in place and prevents accidental dislodgement during use. Mates with all CKC1008 series of lead in wires.

Most imported lamps come equipped with a larger but not to scale Hong Kong type plug. For those not wishing to discard this plug, the CKC1023-2 eyelets provide a simple alternative. First, using the plug attached to the lamp as a guide, mark two holes on the tape run. Then, using either the CKC1044 Awl or a No. 52 drill bit, make two starter holes and insert eyelets. The lamp plug may now be directly inserted, making for an attractively flush and easy to install outlet. Eyelets are brass and measure approximately 3/16" long with an inside diameter of .054" and outside diameter of .071". Packaged in quantities of 20. Illustrated instructions in package.

The CKC806 Ceiling Plate allows any light to be mounted on the same surface as the tape run and become a truly "plug-in" fixture. By Cir-Kit Concepts.  One inch scale. Miniature dollhouse lighting.

At last, an easy solution to one of the most vexing dollhouse miniature wiring problems; sconce installation. Invariably this task has meant the grooving of walls or the placement of sconces on inside walls only. With our CK801 Sconce Adapter these problems are simply a bad memory. Installation can now be made on any wall; exterior or interior. Using the sconce adapter, a sconce may be installed on either a vertical or horizontal tape run and may be rotated up to 30 degrees in either direction for perfect alignment. The adapter ring is fully brass plated making it suitable for even the most ornate of wall fixtures. Complete step-by-step instructions, with detailed illustrations, are included in each package. Extra hollow eyelets are available in CK1023-6 (2 pak) packages.  (CKC801)

B. (CKC804-1)

Cir-Kit Concepts is proud to announce its latest marvel, a push-in, pull-out chandelier adapter. For the first time ever, chandeliers can now be made removable using the ceiling plate that is part of most chandelier designs. The secret of these adapters lies in the use of specially designed spring-loaded eyelets. These eyelets firmly grasp the adapter and securely hold the chandelier to the ceiling. Tests have shown them capable of holding fixtures in excess of four ounces. Most chandeliers weigh in at less than an ounce. Four different diameters allow usage with almost any existing size chandelier, each sold separately. The brass-plated finish and flush fit results in a matching and beautifully coordinated ceiling plate assembly. When attached they will, in most instances, appear as an integral part of the chandelier ceiling plate itself. Just remember you needn't perform major surgery to make your chandelier a plug-in. All that's necessary is a Cir-Kit Concepts' chandelier adapter. Extra spring-loaded eyelets are available in CK1023-6 (2 pak) packages.

Categories

Top Seller

0 Item(s)
US$0.00