Light Bulbs


These high quality bulbs are excellent for illuminating any part of a dollhouse or miniature room. Bulb wires may be attached to our miniature plugs or directly bradded into tape runs with 1/8" brass brads. The 12-volt bulbs should be used in locations where bright illumination is necessary and the 16-volt bulbs in areas where a soft, non-glaring light is preferred. The grain-of-rice (GOR) bulbs are ideal for those applications where minimum bulb size is desirable. Although all bulbs are warranted for 5,000 hours it should be noted that a 16-volt bulb will last immeasurably longer than a similar 12-volt bulb when connected across 12 volts. This is because the 16-volt bulb draws less current and thus generates less heat, the prime detriment to long bulb life. The grain-of-wheat (GOW) bulb measures approximately 1/8" in diameter and the GOR bulb approximately 3/32". These bulbs are made with some of the smallest insulated wires available. Great attention has also been given to making the wire connections at the base of the bulb as unnoticeable as possible. The CK1020 series of 1.5 volt bulbs may be used as is across a CK1009G transformer or as replacement bulbs for Christmas tree strings. The CK1010-18 series of 3.0 volt bulbs may be used as replacement bulbs for any 3.0 volt lighting fixture.

These sockets are designed specifically for the CK1018 series of fluorette bulbs. The clip-in type construction allows simple bulb installation and replacement.

These sockets are designed specifically for the CKC1018 series of fluorette bulbs. The clip-in type construction allows simple bulb installation and replacement. The CKC1019-1 has solder eyes for the connection and soldering of wires at each end. Sockets measure approximately 3/16" wide by 1-5/8" long.

These sockets are designed specifically for the CK1018 series of fluorette bulbs. The clip-in type construction allows simple bulb installation and replacement. 2" wide.  12 volt.

Fluortte Socket & Cord w/2 Bulbs - CKC1019-2

These ceiling shade kits provide a means of creating an attractive lighting scheme at minimum cost. The installation may be accomplished within a matter of minutes and consists of simply bradding in the supplied 12-volt bulb and placing the ceiling shade over the bulb. (The shade may be secured firmly in place to the ceiling with a small amount of fast-drying adhesive.) The entire installation may be made even after the room has been painted or wallpapered to achieve a maximum degree of realism.

These ceiling shade kits provide a means of creating an attractive lighting scheme at minimum cost. The installation may be accomplished within a matter of minutes and consists of simply bradding in the supplied 12-volt bulb and placing the ceiling shade over the bulb. (The shade may be secured firmly in place to the ceiling with a small amount of fast-drying adhesive.) The entire installation may be made even after the room has been painted or wallpapered to achieve a maximum degree of realism. Glass Ceiling Shade Kit Plain 14v - CKC508 Cir-Kit Concepts

These ceiling shade kits provide a means of creating an attractive lighting scheme at minimum cost. The installation may be accomplished within a matter of minutes and consists of simply bradding in the supplied 12-volt bulb and placing the ceiling shade over the bulb. (The shade may be secured firmly in place to the ceiling with a small amount of fast-drying adhesive.) The entire installation may be made even after the room has been painted or wallpapered to achieve a maximum degree of realism.

These high quality bulbs are excellent for illuminating any part of a dollhouse or miniature room. Bulb wires may be attached to our miniature plugs or directly bradded into tape runs with 1/8" brass brads.

CK1010-18 Gow Bulb W/8 Inch Wht Wire, 3V.

 The 12-volt bulbs should be used in locations where bright illumination is necessary and the 16-volt bulbs in areas where a soft, non-glaring light is preferred. The grain-of-wheat (GOW) bulbs measure approximately 1/8" in diameter and draw between 40-60 ma.

Dollhouse miniature Large Pin-In Ceiling Globe Light. These are the easiest to install ceiling lights yet! Nails imbedded in the globes allow pounding of the fixture directly into a tape run with no additional wiring or electrical connections. Apply power and, presto, you have an instant working ceiling light. The CK841 globe is approximately 1/2" in diameter and the CK842, 3/8". Each contains a 12-volt GOW bulb drawing approximately 60 ma of current. (CKC841)

These ceiling shade kits provide a means of creating an attractive lighting scheme at minimum cost. The installation may be accomplished within a matter of minutes and consists of simply bradding in the supplied 12-volt bulb and placing the ceiling shade over the bulb. (The shade may be secured firmly in place to the ceiling with a small amount of fast-drying adhesive.) The entire installation may be made even after the room has been painted or wallpapered to achieve a maximum degree of realism.  This item is the shade only, bulbs sold separately.

These high quality bulbs are excellent for illuminating any part of a dollhouse or miniature room. Bulb wires may be attached to our miniature plugs or directly bradded into tape runs with 1/8" brass brads. The 12-volt bulbs should be used in locations where bright illumination is necessary and the 16-volt bulbs in areas where a soft, non-glaring light is preferred. The grain-of-rice (GOR) bulbs are ideal for those applications where minimum bulb size is desirable. Although all bulbs are warranted for 5,000 hours it should be noted that a 16-volt bulb will last immeasurably longer than a similar 12-volt bulb when connected across 12 volts. This is because the 16-volt bulb draws less current and thus generates less heat, the prime detriment to long bulb life. The grain-of-wheat (GOW) bulb measures approximately 1/8" in diameter and the GOR bulb approximately 3/32". These bulbs are made with some of the smallest insulated wires available. Great attention has also been given to making the wire connections at the base of the bulb as unnoticeable as possible. The CK1020 series of 1.5 volt bulbs may be used as is across a CK1009G transformer or as replacement bulbs for Christmas tree strings. The CK1010-18 series of 3.0 volt bulbs may be used as replacement bulbs for any 3.0 volt lighting fixture.

Categories

Top Seller

0 Item(s)
US$0.00